30v Gigabit Surge Supressor

Cambium Networks designs outdoor wireless broadband solutions to
operate in the toughest of environments. Lightning strikes are the most
typical cause of system outages or failures of mast-mounted equipment
especially when mounted as high as 300m. The Gigabit Ethernet Surge
Suppressor is critical for lightning protection to minimize the potential
for damage.
Network operators should always follow best-practices for grounding and lightning
protection. Doing so will minimize network outages and reduce the associated costs
of tower climbs and equipment repair/replacement.
The Gigabit Ethernet Surge Suppressor is compatible with the 450 and 450b (Subscriber Module),
F180, F200 (other 30V Gigabit products). The unit ships suitable for mounting to a wall or pole.
FEATURES
Model Number C000000L065A
Transfer Rate 1000 Base T
Connectors Two x RJ-45
Nominal Voltage 30V
Protection Mode Line-to-line and line-to-ground
Surge Arrestor TVS Diodes (Transient Voltage Suppression for longer operational life)
Surge Current Rating, L-G, total 216A, 10/1000us
Response time 5 nanoseconds typical
Mounting Pole mount or wall mount
Dimensions 4.6 in. x 3.4 in. x 1.8 in.(118mm x 87.5mm x 46.5mm)
Weight 0.34 lbs (156 gm)
Wind Survival 200 mph (321 km/hour)
Operating Temperature -40° F (-40° C) to +140° F (+60° C)
Humidity 100% condensing
Environmental Protection IP54 (Dust and Water Intrusion Protection)